Differences

This shows you the differences between two versions of the page.

--- omiss:guidelines:preamble [2023/01/21 06:10] – wx0mik
+++ omiss:guidelines:preamble [2023/01/21 06:13] (current) – wx0mik
@@ Line 22: / Line 22: @@
   All net times are in Zulu and the current time is <insert time from netlogger> Zulu.
+The following section may be skipped if there are no newcomers on the worklist. If there are newcomers this section should be read, welcoming them to our net. It is optional if the callsigns of those new members is read in the below, because sometimes it can confuse them into thinking they are getting a call.
+  We have <insert number> operators listed as newcomers on the list. They are <insert callsigns / optional>. On behalf of the members present we would like to welcome them to the net, and we look forward to each of them pursuing membership in OMISS. For more information go to our website www.omiss.net. We use a program called Netlogger. Please see our website, lower left-hand side, for more information.
+  As a reminder to all stations you can receive a call at any time, but you must wait your turn to make a call.
+The next section is a call to members to identify if they are looking for their 49th or 50th state for the OMISS Worked all States (WAS) or Statehood awards. Members are usually given a priority call, meaning they can skip to the head of the line, if a station joins that would give them their 49th or 50th. If prop or conditions are poor, it’s acceptable to ask stations to identify on AIM as well.
+  For those of you looking for your 49th or 50th state for OMISS Worked All States or Statehood awards you will be given priority should those states check-in. If anyone is looking for their 49th or 50th states, please call now (or posted the request on AIM).
+Finally, to close the preamble, we announce procedure for mobile and combo stations. Some Net Controllers will look at their worklist and call out if they have either of these two groups on the list during this section of the preamble.
+  When working a mobile station, please include both signal reports and the mobile stations location on your QSL card.
+  Contacts made with a combo station count as only one call.